[Elecraft] KPA100 Final Transistor base resistance

[Darwin, Keith]

Maybe.  When I did my Rev D KPA100 a few weeks ago, only ONE of the resistances was changed to read 11 - 16 in the errata.  The other still said 12 - 16.  Maybe the errata has been update in the last few weeks?
 
In my case, both transistors measured 11.5 ohms and the rig works fine.
 
73!
 
- Keith N1AS -
- K2 5411.ssb.100 -

________________________________

From: elecraft-bounces at mailman.qth.net on behalf of Don Wilhelm
Sent: Sat 12/23/2006 12:25 PM
To: Kevin Schmidt; Elecraft at mailman.qth.net
Subject: RE: [Elecraft] KPA100 Final Transistor base resistance



Kevin,

You are OK - check the Rev D manual and its errata sheet and you will find
the range has been changed to 11 to 16 ohms.

73,
Don W3FPR