[Elecraft] K2, Freq readout

[Don Wilhelm]

Carel,

You8 did not specify, so I must ask -- did you alos do CAL FIL before you
checked the result.  It is necessary that you do both CAL PLL and CAL FIL
(for each BFO) after adjusting the refcerence oscillator.

73,
Don W3FPR

> -----Original Message-----
>
> Seems that something strange is going on with my K2 (-:
> Reading through the responses it strengthened my feeling I did
> the procedure
> (as described by Wayne, n6kr getting an exact difference of 10.000 MHz
> between tp1 and tp2) correct. But my readout is still approx 1 KHz off.
>
> Will give it another go (-:
>
> 73's,
> Carel.