[Elecraft] Anything News at Dayton from Elecraft??

[Darrell Bellerive]

I wonder if those of us not under FCC regulation could purchase an 
international version of the amp. I'd love to see 800 watts out from the amp 
with the QRP version of the K2 running at 10-15 watts. Perhaps even a lower 
priced version without SO2R capabilities...


On May 23, 2005 09:55 am, George Cortez wrote:
> he had it driving @ about 36 watts to get about 1200 watts out at the
> time.....
> Just to show what she'll do..... It will require 50 watts for 800 when
> it is released
> The poor  dummy load  was only a 500 watter  and  it was  HOT!
>
> George NE2I
>
> Tom Hammond wrote:
> > K2/100!
> >
> > According to the FCC, FCC rules dictate no more than 13dB of gain from
> > an external amplifier.  As a result, the K2/100 will be required for
> > full output from the proposed QRO amp, which will require about 50W to
> > fully drive it.
> >
> > Tom   N0SS
> >
> > At 02:58 PM 5/22/05, rckchp at comcast.net wrote:
> >> Was it a K2?.....or a 100 watt K2/100?
> >>
> >> Rich  K2CPE
> >> K2 #1102
> >>
> >>  >It was driven with about 30-40W from a K2.................
> >>


-- 
Darrell Bellerive
Amateur Radio Stations: VA7TO, VE7CLA
Grand Forks, British Columbia, Canada