[Elecraft] Anything News at Dayton from Elecraft??

George Cortez ne2i at optonline.net
Mon May 23 12:55:11 EDT 2005


he had it driving @ about 36 watts to get about 1200 watts out at the 
time.....
Just to show what she'll do..... It will require 50 watts for 800 when 
it is released
The poor  dummy load  was only a 500 watter  and  it was  HOT!

George NE2I

 

Tom Hammond wrote:

> K2/100!
>
> According to the FCC, FCC rules dictate no more than 13dB of gain from 
> an external amplifier.  As a result, the K2/100 will be required for 
> full output from the proposed QRO amp, which will require about 50W to 
> fully drive it.
>
> Tom   N0SS
>
> At 02:58 PM 5/22/05, rckchp at comcast.net wrote:
>
>> Was it a K2?.....or a 100 watt K2/100?
>>
>> Rich  K2CPE
>> K2 #1102
>>
>>  >It was driven with about 30-40W from a K2.................
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>



More information about the Elecraft mailing list