[Elecraft] Frozen K2
Tom Althoff
althoff at verizon.net
Fri Dec 30 20:21:20 EST 2005
DOH!
Of course...If BOTH the dit and dah lines are shorted to ground and you have
auto-sense on...that would cause a continuous carrier instead of dits or
dahs. Didn't think about that at first...sorry.
Tom K2TA
----- Original Message -----
From: "Tom Althoff" <althoff at verizon.net>
To: <Elecraft at mailman.qth.net>
Sent: Friday, December 30, 2005 8:16 PM
Subject: Re: [Elecraft] Frozen K2
> Rolf...how is your K2 normally configured? Do you keep the key input set
> to normal/reverse keyer paddle input or Handkey?
>
> If you normally run a straight key, bug or external keyer then yes a
> possible short in the keying line would explain your symptoms.
>
> But if you normally use the internal keyer and the keying line was shorted
> you should be hearing either dits or dahs constantly.
>
> A stuck keyswitch on power up would lock up all buttons but not generate a
> tone.
>
> Sorry I can't be more helpful.
>
> Tom K2TA
>
> ----- Original Message -----
> From: "Rolf" <rolf.gothberg at bredband.net>
> To: <Elecraft at mailman.qth.net>
> Sent: Friday, December 30, 2005 5:53 PM
> Subject: [Elecraft] Frozen K2
>
>
> >
> > Hi again,
> >
> > I have told you that my K2 #4979 has worked fine until it
> > suddenly appears to be dead. When powered on the display
> > first shows ELECRAFT then 7100.00 in CW mode and that
> > a constant sound hears.
> >
> > I just talked to a friend here in Stockholm about it. He has
> > built two K2s and his theory is that the rig is stuck in transmit
> > and that the audio is the side tone. That explains why it only
> > responds to the power knob.
> >
> > So what, if any, can be done about this?
> >
> > Best 73s
> >
> > Rolf SM0YQC
> > Stockholm, Sweden
> >
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> > http://mailman.qth.net/mailman/listinfo/elecraft
> >
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
More information about the Elecraft
mailing list