[Elecraft] KCR2 with 2 radios, some questions

[Jack Brindle]

The KRC2 was designed to directly listen to quite a few radios from 
many manufacturers. It does this through several I/O ports, using 
Elecraft's AuxBus, Elecraft/Kenwood serial IO, Icom/Yaesu analog 
voltages and Yaesu (and a host of others) BCD. You can actually connect 
the KRC2 to several of these at the same time. it will only make band 
switching decisions for one of them at a time. If the KRC2 is 
configured (through a jumper at this point) to listen to the KRC2 and 
you want to have it respond to an Icom rig, simply change the jumper in 
the KRC2 and power the unit off then back on. The KRC2 does not need 
any other devices (computers, etc.) to interpret what the rig is 
indicating.

The KRC2 is extremely versatile, with many features just waiting to be 
discovered. Anyone interested should take a good look at the manual and 
think about what they might want the KRC2 to do. The next realization 
is that the KRC2 can most likely do it!

-Jack Brindle, WA4FIB
=======================================================================