[Elecraft] KCR2 with 2 radios, some questions

[Larry Phipps]

If you use TRX-Manager to control the two radios, you can assign a serial port that will act as the "rig", outputting a signal that the KRC2 can be connected to. I forget the name of the utility that does this, but it's in the TRX menus.

I also have a free utility on my website that does the same thing, making a serial port look like a Kenwood radio and following the freq of TRX-Manager though OLE. I originally designed it for use with SteppIR controllers. It's called LP-StepLink.

73,
Larry N8LP
www.telepostinc.com/n8lp.html



----- Original Message ----- 
From: Luc Favre 
To: elecraft at mailman.qth.net 
Sent: Monday, September 20, 2004 3:51 AM
Subject: [Elecraft] KCR2 with 2 radios, some questions


I'm considering the acquisition of a KRC2-unit, but I'm not sure it will
fill my needs in my specific contest configuration.
I want to use the KRC2 with a K2 with a KPA100, a KAT100 and a linear
(SB220) as first radio, another transceiver as second radio, a
PC-contest-program (TR-log or similar), antennas swiching-relais (to switch
antennas back and forth beetween the two radios) and other switching devices
for keyer and headphones.
My question : is the KRC2 the unit I need ?
Another question : the KRC2 manual mentions a "daisy-chain" to couple the
KTA100 to the KRC2. What is this ? Another word to say parallel connecting ?
Thank for your help

Luc/F6HJO/Paris



_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft    
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.766 / Virus Database: 513 - Release Date: 9/19/2004