[Elecraft] Missing some "dits" and "dahs" thanks all !

[Ken K7ZUM]

Nope,  just Gres"HAM" O-re-GONE !!

73 de K7ZUM
Ken in Gres"HAM"  Ore




> Is that what makes working Multnomah County so special?  :)
>     73,
>        Kevin.   KD5ONS
>
>
>
> On Thu, 30 Sep 2004 23:15:10 -0700, Ken  K7ZUM <Ken.Knopp at verizon.net>
> wrote:
>
> >
> > Thanks to all who answered my initial question about missing a few dits,
> > and now I know that it is "normal"  with an easy work around,
> > now I'll use a single "dah"  (instead of "dits")  seems to bring the
> > power
> > up
> > almost immediate.
> >
> > and btw, Ron, you would not belive what kind of weird
> > neo-geo-gravitational
> > wiz bang super duper electron charged flux we gots going on over here in
> > East County !!
> >
> > 73 de K7ZUM
> > Ken in Gres"HAM"  Ore
> >
> >
> >
> >
> >
> >
> > Hi All,
> >
> >        After a few months delay of ignoring my K2, I finally got back to
> > putting
> > the audio board, keying mod and new firmware in, and have noticed what I
> > think is a new problem for me, (not sure if it wasn't there before)
> >
> >          When in CW mode, (have the 100 watt pa board) and I first key
> > up,
> > I get nothing out, seems to take about 2 to 3 dits before power comes
up,
> > after that, all is fine, If I change bands, the same thing happens, go
> > back
> > to
> > the previous band, its the same, 2 to 3 dits, power comes up, have
> > noticed,
> > that usually on the 2 or third dit, it only comes up to maybe 20-30
> > watts,
> > then full 100 watts, this does not seem normal, did I forget to turn
> > something
> > on ? or off ??  anybody else come across this ???
> >
> >
> >
> > 73 de K7ZUM
> > Ken in Gres"HAM"  Ore
> >
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> > http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> >
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> > http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
>
>
>
> -- 
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com