[Elecraft] Missing some "dits" and "dahs" thanks all !

Kevin Rock kevinrock at earthlink.net
Fri Oct 1 14:04:54 EDT 2004


Is that what makes working Multnomah County so special?  :)
    73,
       Kevin.   KD5ONS



On Thu, 30 Sep 2004 23:15:10 -0700, Ken  K7ZUM <Ken.Knopp at verizon.net> 
wrote:

>
> Thanks to all who answered my initial question about missing a few dits,
> and now I know that it is "normal"  with an easy work around,
> now I'll use a single "dah"  (instead of "dits")  seems to bring the 
> power
> up
> almost immediate.
>
> and btw, Ron, you would not belive what kind of weird 
> neo-geo-gravitational
> wiz bang super duper electron charged flux we gots going on over here in
> East County !!
>
> 73 de K7ZUM
> Ken in Gres"HAM"  Ore
>
>
>
>
>
>
> Hi All,
>
>        After a few months delay of ignoring my K2, I finally got back to
> putting
> the audio board, keying mod and new firmware in, and have noticed what I
> think is a new problem for me, (not sure if it wasn't there before)
>
>          When in CW mode, (have the 100 watt pa board) and I first key 
> up,
> I get nothing out, seems to take about 2 to 3 dits before power comes up,
> after that, all is fine, If I change bands, the same thing happens, go 
> back
> to
> the previous band, its the same, 2 to 3 dits, power comes up, have 
> noticed,
> that usually on the 2 or third dit, it only comes up to maybe 20-30 
> watts,
> then full 100 watts, this does not seem normal, did I forget to turn
> something
> on ? or off ??  anybody else come across this ???
>
>
>
> 73 de K7ZUM
> Ken in Gres"HAM"  Ore
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.): 
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com



-- 
  


More information about the Elecraft mailing list