[Elecraft] RE: K1 Output problems

[Richard Klingensmith]

After my late night testing I've started with a little more discipline this 
morning following the Cheap and Dirty Signal Tracing steps. I've found that 
I have a good signal on all bands at P2 pin1. I can also peak the signal on 
all bands in the premix Band-Pass Filter when the signal is injected at P2 
pin1. Now when I move the signal to P2 pin 8 I can peak the signal for 20 
and 18 meters in the RF Band-Pass filter but capacitors CE and CF for 30 
meters and CG and CH for 40 meters do nothing to peak the signal.

It's time to get out and about and stop banging my head against the wall 
because as you can tell I'm not an expert at electronics hi! Thank you for 
letting me do a little documentaion along the way of testing. If any of this 
sounds familiar to you please give me some pointers. I've made some contacts 
using the K1 and I'm having withdrawal.

Rick
WA3TUU

_________________________________________________________________
Watch LIVE baseball games on your computer with MLB.TV, included with MSN 
Premium! http://join.msn.click-url.com/go/onm00200439ave/direct/01/