[Elecraft] K60XV Alignment Question

[Jessie Oberreuter]

     The manual is a bit confusing here...  The trimmers are only
meaningful on the 60m band.
     The capacitor you removed is replaced on the K60XV board, so you
shouldn't have to tweek the 40m inductor.




On Sat, 22 May 2004, Brian Wruble wrote:

> Hi all:
>
> I just completed the K60XV 60 meter module for my K-2.  The alignment
> requires adjusting trimmers C1 and C2 on the module to peak received signals
> and then xmit power.  You do this first on 60 meters, then again on 40
> meters.  When I tried the 40m part, the position of C1 and C2 had absolutely
> no effect on either received signal strength or on xmit power.
>
> What should I be expecting here?  Tnx de Brian W3BW
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>