[Elecraft] Operating PSK31 - Drift?

[Gregg Lengling]

I'd first check my software I'm using.  You have to make sure that the
software has done it's check for the proper offset due to the differences in
sound cards.  Read the documentation for your application, it could be you
have auto-tune on for the receive and this will offset you improperly.


Gregg R. Lengling, W9DHI, Retired
Administrator http://www.milwaukeehdtv.org
K2/100 S#3075 KX1 S# 57
Member:  ARRL, RSGB, RCA, WERA and ORC
 


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of KI7V (John)
Sent: Saturday, May 22, 2004 11:02 AM
To: Elecraft Mail list
Subject: [Elecraft] Operating PSK31 - Drift?

Hello,
 
I just built my SSB module for my K2 about two weeks ago.  All seems to work
well.  After building the SSB
Module, I decided give PSK31 a try.  Just built a couple of audio cables and
away it went - no problems.
When working another Station on PSK31, I've noticed that each time I stop
transmitting, I have to adjust
the VFO slightly up to Sync up the other stations signal.  I don't know if
my K2 is drifting or what.  The
Other stations that I've worked have commented on this as well and it
appears that it moves up about 60Hz
With each xmit/receive cycle.  Has anyone else noticed this?

Thanks,
 
73s,
John - KI7V
K2 #3706
 

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You must be a subscriber to post.
Elecraft web page: http://www.elecraft.com