[Elecraft] SSB adjustment

[Eric Swartz WA6HHQ - Elecraft]

In addition to Don's excellent app notes for adjusting SSB filters, I agree 
that the final adjustment for TX SSB settings of BF1t on USB and then LSB 
should be made while listening to your signal on another radio. That's how I 
do it.

Its best to record the other radio's RX or to have a second person listen to 
you on the air as its difficult to judge your audio quality accurately when 
listening to the radio at the same time you are talking.

100-200 Hz difference in the OPT1 filter's BF1t settings can make a HUGE 
difference in transmit audio quality. Also remember that USB and LSB BF1t 
settings are independent.

73, Eric


Don Wilhelm wrote:

> Bruce,
> 
> Take a look at my website www.qsl.net/w3fpr article on K2 dial calibration -

> 73,
> Don W3FPR
> 
> ----- Original Message ----- 
> 
> 
>>OK.  I've decided to have another go at getting my K2-100 to work better
>>on SSB.  
>>There is a significant difference in transmitted audio between upper and
>>lower sideband. 
>>Bruce - W8FU