[Elecraft] Scope Cleaner

Tue May 4 18:33:07 2004

I've used Simple Green with good results.

Bob
WB6KWT
----- Original Message ----- 
From: "Don Wilhelm" <[email protected]>
To: "Elecraft" <[email protected]>; "John Cooper" <[email protected]>
Sent: Tuesday, May 04, 2004 2:07 PM
Subject: Re: [Elecraft] Scope Cleaner

> John,
>
> The best method I know of follows:
>
> Remove the outer case, blow the dust from the inside, clean the scope face
> with any non-scratch stuff that does the job, then use somethin like
Formula
> 409, Greased Lightning or other good de-greaser on the case parts.  You
can
> use the same thing on the knobs and face if you work carefully not to get
it
> on the 'inards'.
>
> When everything is dry put the covers back on and fire it up.
>
> 73,
> Don W3FPR
>
> ----- Original Message ----- 
>
> Got a used Tektronix Scope, whats safe to use to clean it up?
>
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be subscribed to post to the list.
> To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> Also see: http://www.elecraft.com/elecraft_list_guidelines.htm
>