[Elecraft] Multicore Solder Order List - Sent via Elecraft Reflector
Tom Hammond
[email protected]
Tue Mar 23 17:38:00 2004
Greetings:
THIS MESSAGE WAS SENT VIA THE ELECRAFT REFLECTOR.
As of March 20th, I have received tentative order commitments for one or=20
more rolls of Multicore 63/37 0.020" diameter rosin cores solder wire from=
=20
the following:
F. Name L. Name Call # E-Mail
Robert Abell VE3XM 2 <[email protected]>
Jeff Anderson KD7PAW 2 <[email protected]>
Dan Barker WG4S 1 <[email protected]>
Pete Barkevich AA2ZR 1 <[email protected]>
Rich Beckwith WN=D8X 2 <[email protected]>
Rick Bennett KC=D8PET 1 <[email protected]>
Elliott 'Sandy' Blaise W5TVW 2 <[email protected]>
Dale Boresz WA8SRA 4 <[email protected]>
Jack Boswell N=D8KSF 4 <[email protected]>
Ron Casteel N6CSS 1 <[email protected]>
John D'Ausilio W1RT 1 <[email protected]>
Greg Fischer AB7R 1 <[email protected]>
Todd Fonstad N9NE 2 <[email protected]>
Don Graham N5QVF 2 <[email protected]>
Richard Hamlin WA7KMA 6 <[email protected]>
Tom Hammond N=D8SS 3 <[email protected]>
Steve Harvey NN=D8B 2 <[email protected]>
Willie Hew KH6NO 2 <[email protected]>
Harry Hooker W8YMO 4 <[email protected]>
Bill Lambert AK4H 3 <[email protected]>
Glenn Maclean WA7SPY 1 <[email protected]>
Michael Melland W9WIS 2 <[email protected]>
Max Moon K=D8MAX 2 <[email protected]>
Steve Morse KB=D8OXU 1 <[email protected]>
Mike Murray W=D8AG 2 <[email protected]>
Bryan Nehl K=D8EMT 1 <[email protected]>
Scott O'Keef N4RI 2 <[email protected]>
John Porter KD5EJA 1 <[email protected]>
Frank Qualls KC7QER 3 <[email protected]>
Tim Raymer KA=D8OUV 2 <[email protected]>
Joe Roof W4JHR 2 <[email protected]>
Vic Rosenthal K2VCO 2 <[email protected]>
Niel Skousen WA7SSA 1 <[email protected]>
William Spaulding NA7Y 2 <[email protected]>
Larry Walker KW4A 2 <[email protected]>
Don Wilhelm W3FPR 2 <[email protected]>
Kevin Wren KC=D8JDW 2 <[email protected]>
The list shows the name I have on file for you, your callsign, the number=20
of rolls of solder you have indicated you wish to order, and the e-mail=20
address I have for you.
This order comes to a total of 63 rolls (3+ cases) of solder.
I am sending copies of this message BOTH to the e-mail address I have on=20
file for you AND via the Elecraft reflector. As a result, you should=20
receive TWO copies of the message. If you do NOT receive two copies, then=20
there's a chance I have a bad e-mail address for you, or the message I send=
=20
to you was rejected for some other reason.
CHECK THE FIRST LINE OF THIS MESSAGE. IF IT READS:
THIS MESSAGE WAS SENT DIRECTLY TO YOUR E-MAIL ADDRESS ON FILE HERE
then I have a good address for you. On the other hand, if the ONLY message=
=20
you received reads:
THIS MESSAGE WAS SENT VIA THE ELECRAFT REFLECTOR
then you SHOULD have received a SECOND message directly from me. IF YOUR=20
NAME IS ON THE LIST ABOVE AND YOU DID NOT RECEIVE THAT (DIRECTLY-SENT)=20
MESSAGE, CONTACT ME IMMEDIATELY.
If you wish to CANCEL or REDUCE (only) your order, please do it NOW, before=
=20
I place the order. Any rolls remaining from this order will be offered=20
(LATER) to anyone who did not get their order in to me on time. Regardless,=
=20
I WILL NOT BE PLACING A SECOND ORDER FOR SOLDER... PERIOD!!!
If you HAVE already placed a tentative order for solder with me and DID NOT=
=20
receive an e-mail sent DIRECTLY to you, CONTACT ME NOW! The directly-mailed=
=20
message contains a LOT more important information this message does. This=20
message is just to get your attention!!
If you have NOT already ordered solder from my original posting, PLEASE DO=
=20
NOT ATTEMPT TO DO SO NOW... IT'S TOO LATE! Sorry, but I had to place a=20
cut-off date (March 20th) and that has now passed. Maybe someone else will=
=20
pick up the next ball and place another group order. But it won't be me.