[Elecraft] Fwd: KIO2 Problem

Sun Mar 7 17:29:00 2004

Fixed it!

After all the testing, computer setup and continuity checking, I decided 
the problem could only be the physical computer connection.  So I took out 
the jackscrews to make sure the Female D connector was fully in...

The KIO2 worked straight away.  Guess I am not the first to put the screw 
retaining ridges too far forward in the shell!

Many thanks to the guys who replied off line with a great list of checks.

Rob

M0RAC

>Date: Sun, 07 Mar 2004 15:02:37 +0000
>To: [email protected]
>From: Robert Cochrane <[email protected]>
>Subject: KIO2 Problem
>
>I am adding the KIO2 to my K2.
>
>All the preliminary tests were successful but I get "no response from K2" 
>using two different programs and two different computers when carrying out 
>the serial interface test.  The signal from the control board operates the 
>ATU correctly.

(snip snip)

Robert A Cochrane
7 Lawn Terrace
Blackheath
London SE3 9LJ   UK

Tel (44) 020 8297 1978
Mob (44) 07764 197 701