[Elecraft] K2 Update

[k4zm]

Dennie:       =20
   =20
Good News.  Your K2 is working. I located the problem with your low =
sensitivity problem on 40 meters (A solder splash in the area of C6 and =
the problem with the finals was a broken wire on T4).  The primary, =
wound with green wire, had one lead  broken and because it is solid =
conductor wire it appeared to still be connected.  I rewound T4 and =
installed the transistor and she is now putting out a cool 10 watts all =
the way up to 10 meters.  I still have to install the DSP module and the =
SSB Generator.  You did not send the Freq Counter cable so I cannot set =
your BFO to the correct freq for each filter setting.  Mine will not =
work with yours due to different connectors.  Progress is being made...

73
Jim Younce K4ZM
K2  SN: 18


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---