[Elecraft] MFJ-259B alignment information?

[Vic Rosenthal]

Don Wilhelm wrote:
 > I now tend to disbelieve my MFJ-259 and would
> like to calibrate it.  I have the instruction manual that came with it and
> it is not adequate for a calibration task.

Try the MFJ with an ethernet terminator.  I bet it will look much 
better.  I suspect the resistors are not as good as they are supposed to be.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco