[Elecraft] MFJ-259B alignment information?

[Don Wilhelm]

Does anyone know where I can find detailed alignment instructions for a
MFJ-259B?

I bought some Vishay precision non-inductive power resistors - 25 ohm, 50
ohm and 100 ohms 100 watt rating to use as dummy loads.  I assembled them to
a proper heat sink and connected to an SO-239 with zero length leads - and
when I tried my MFJ-259 with these resistors, it told me that these
resistors were OK only up to 10 MHz or so!!!  At 30 MHz, the 50 ohm resistor
read 62 ohms with a reactance of 10!!!  Given the specs on these resistors
(flat to at least 170 MHz), I now tend to disbelieve my MFJ-259 and would
like to calibrate it.  I have the instruction manual that came with it and
it is not adequate for a calibration task.

73,
Don W3FPR