[Elecraft] KX-1 Alignment & Test Part 1 Discrepancy: Need Help

[Ron D'Eau Claire]

That's right Brian. The display shows the timeout period when you turn =
the
knob to adjust it then it returns to the L number you have chosen for
display brightness after about 1 second. I'm not sure where the "10 =
seconds"
came from. Might be an older version of the firmware.

Ron AC7AC

-----Original Message-----
...On page 29, left column, 4th step:  "As you rotate the knob, the =
timeout
period is flashed... for 10 seconds".  In my case, the timeout period
increments, but the display
returns to "L  3" --- the LED brightness setting.   I suspect this is
correct, and that the manual wording is confusing me.  Can anyone verify
that this is ok?=20

Tnx de Brian W3BW=20