[Elecraft] DM2

[Charles Greene]

Tom,

I wired up the jumper for the MH-2 and put the resistor in.  If the two 
take different jumper wirings, that could be the problem.  Does anyone know 
if both mikes take the same jumper wiring?

Chas

At 03:23 PM 1/23/2004, Charles Greene wrote:
>At 02:49 PM 1/23/2004, redmen1969@optonline.net wrote:
>>Hi Chas,
>>
>>   I'm not familiar with the DM2, but I have the MH-2.
>>
>>   This is just a thought, but it might be audio related.  When you wired 
>> the K2 up for the MH-2 (an electret mic) did you place the resistor on 
>> the back of the 8 pin mic socket as is stated in the instructions?
>>
>>If the MH-2 is working OK, it would seem that you have the resistor 
>>someplace (some guys, including myself, are putting it the MH-2's plug 
>>and not on the 8 pin socket.)
>>
>>As I said I'm not familiar with the DM2, but perhaps you might take a 
>>look at the resistor and see if its getting in the way of things.
>>
>>Secondly (is that a word?), did you check to see that the DM2 and the 
>>MH-2 both call for the same header wiring in the K2?
>>
>>Let me know what happens.
>>
>>Tom McCulloch, WB2QDG