[Elecraft] K2 Transmitter Alignment

[Joe - aa4nn]

Hi Gang,

Trouble shooting why I can't get any output when adjusting L8, L9, C21 & =
C23 for 20/30m, I have pulled L18, L19 & L20 to make sure there is good =
solder connections.  I reseated C21 and C23.  I checked all caps in the =
BPF and LPF for value and good solder connection.  I checked K4a to make =
sure pin 3-4 were latched and pin 2-3 were open.  I checked K4b to make =
sure pin 7-8 were closed and pin 8-9 were open.  All seems in order.

Something about K9 tho.  I would expect to see K9a pin 2-3 open and K9b =
pin 3-4 closed due to band selection 14.100.  However, K9a pin 2-3 is =
closed, pin 3-4 is closed ??  K9b pin 7-8 is closed and pin 8-9 is =
closed.  At the same time, looking at 12/10m K10a pin 2-3 closed, ,pin =
3-4 closed, K10b pin 7-8 closed, pin 8-9 closed.  This seems strange to =
me.

What do you think?

de Joe, aa4nn



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---