[Elecraft] KPA100 problems

Sun Jan 18 14:12:00 2004

My "stock" K2 / 100 power output varies not more than 2
or 3 watts. My amp doesn't care at all.

Doug
W6JD

----- Original Message -----
From: "Ken Wagner" <[email protected]>
To: "Rich McCabe" <[email protected]>; <[email protected]>
Sent: Saturday, January 17, 2004 2:50 PM
Subject: Re: [Elecraft] KPA100 problems

> HI Rich:
> Only thing I can say is that it worked here.  I had about +/-10 to 12 watt
> fluctuation using the KPA100 and changuing the value of that resistor in
> the AGC circuit caused the fluctuations to drop to about +/- 1 to 2 watts.
> Good Luck!
> 73, Ken K3IU
> ~~~~~~~~~~~~~~~~~~~~~~~~~~
> At 04:16 PM 1/17/04, Rich McCabe wrote:
> >Well  I read the troubleshooting and have tried swapping the resistor out
> >with a pot and changed the value, but have had no improvement on mine. I
> >too find it annoying and it drives my amp nuts. 7-10 watts at the rig is
> >VERY significant at legal limit with the amp.
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be subscribed to post to the list.
> To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> Also see: http://www.elecraft.com/elecraft_list_guidelines.htm