[Elecraft] N4PY Elecraft K2 Software now available

Sat Jan 10 12:14:00 2004

I have the same keying line set up from a com port.  I will let you know how
it works with the N4PY program running.  But won't be till this evening as I
have to go out for awhile and exercize the horses.

Greg
AB7R

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Jim Brown
Sent: Saturday, January 10, 2004 6:36 AM
To: Elecraft List
Subject: Re: [Elecraft] N4PY Elecraft K2 Software now available

On Sat, 10 Jan 2004 14:20:49 -0000, Carl Moreschi wrote:

>5) Full CW Keyboard Keyer available.  There is no keying interface required
>to key the K2.  It is keyed via serial commands over the serial port.

This sounds real neat, but I see some potential for a conflict. Let's
say that I have WriteLog running with your software. I currently use
WriteLog to generate CW on the DTR line, taking the DTR line out at the
rig end of the serial cable to the keying port (through an NPN
configured as a polarity inverter). Can WriteLog key the K2 through
serial commands to the K2, or do I still have to use the DTR line? And
does that work when your software has the serial port?

Jim Brown K9YC

_______________________________________________
Elecraft mailing list: [email protected]
You must be subscribed to post to the list.
To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com
Also see: http://www.elecraft.com/elecraft_list_guidelines.htm