[Elecraft] N4PY Elecraft K2 Software now available

Sat Jan 10 09:55:00 2004

Jim,

What you describe would be a conflict.  The solution is to have WriteLog key
the K2 via the parallel port.  You then also configure WriteLog to talk to a
tentec pegasus.  This will cause all WriteLog's radio commands to come to my
program.  My program will keep track of everything and control one or two
K2's in complete harmony.  My program will worry about which K2 has last
transmitted and export the appropriate frequency to WrieLog.

Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Jim Brown" <[email protected]>
To: "Elecraft List" <[email protected]>
Sent: Saturday, January 10, 2004 2:35 PM
Subject: Re: [Elecraft] N4PY Elecraft K2 Software now available

> On Sat, 10 Jan 2004 14:20:49 -0000, Carl Moreschi wrote:
>
> >5) Full CW Keyboard Keyer available.  There is no keying interface
required
> >to key the K2.  It is keyed via serial commands over the serial port.
>
> This sounds real neat, but I see some potential for a conflict. Let's
> say that I have WriteLog running with your software. I currently use
> WriteLog to generate CW on the DTR line, taking the DTR line out at the
> rig end of the serial cable to the keying port (through an NPN
> configured as a polarity inverter). Can WriteLog key the K2 through
> serial commands to the K2, or do I still have to use the DTR line? And
> does that work when your software has the serial port?
>
> Jim Brown K9YC
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be subscribed to post to the list.
> To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> Also see: http://www.elecraft.com/elecraft_list_guidelines.htm