[Elecraft] Alignment + Test, Part 1, current draw

[hb9tjw@swissinfo.org]

Hi all,
I just finished the alignment and test in part 1. Everything was ok,
except of the current reading: It should be 60 to 80 mA, my reading
was 100 mA (LCD: nite, no bars on). As I knew from this wonderful
reflector, the K2 current display isn't always accurate, so I measured
the current with a DMM in series in the power supply. The reading
was 110 mA, which  is even worse. Should I be concerned ?

tnx, 73 de Markus, HB9TJW