[Elecraft] power control indicator phenomena

[Stewart Baker]

On Fri, 31 Dec 2004 08:42:38 -0800, Vic Rosenthal wrote:
> Stewart Baker wrote,
>
>>>> Since my original mail I have found that this anomaly only occurs when
>>>> on
>>>> transmit, and is independent of whether RF is being generated or not.
>>>>
>>>> I quite often vary my power during a transmission to get signal reports
>>>> on different station configurations e.g speech processing, antennas,
>>>> microphones, etc.
>>>>
>>>> This does not really effect my station operation, but is a minor
>>>> irritant in that I cannot rely on the LEDS always showing the correct
>>>> status
>>>> of my K2/100 power out, as the manual says that they should.
>>>> I will probably disconnect the LEDS, as at present they are rather
>>>> confusing.
>>>>
> I have a simpler solution: let go of the PTT when changing power output.

Yup - that would do it..

73
Stewart G3RXQ