[Elecraft] power control indicator phenomena

[Vic Rosenthal]

Stewart Baker wrote,

>>>Since my original mail I have found that this anomaly only occurs when on
>>>transmit, and is independent of whether RF is being generated or not.

>>>I quite often vary my power during a transmission to get signal reports
>>>on different station configurations e.g speech processing, antennas,
>>>microphones, etc.

>>>This does not really effect my station operation, but is a minor
>>> irritant in that I cannot rely on the LEDS always showing the correct status
>>>of my K2/100 power out, as the manual says that they should. 
>>>I will probably disconnect the LEDS, as at present they are rather confusing.

I have a simpler solution: let go of the PTT when changing power output.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco