[Elecraft] MD2 Mic

[k5jaz at att.net]

Hi Tom. I did this mod this weekend without any problems. I partially removed 
the heatshrink where required, soldered, and put a single layer of plastic tape 
around all pins before reassembly.
--
Regards,
Jim Brown, K5JAZ

 -------------- Original message ----------------------
From: Tom Mc <redmen1969 at optonline.net>
> Has anyone tried placing the 5.6k resistor for the MD2 microphone into the
> plug or into the microphone itself (rather than into the K2)?
>