[Elecraft] Toroid _winding_ insulation (not ends)

[JEAN-FRANCOIS MENARD]

Mine did the same.... toroid side seems to scratch the wire because too 
many turns to do.... if it's not too scratch.... I put red finger nails 
paint on the small part of coating that is missing... the same red ;-) 
and it works...


Le 04-08-17, à 22:51, Ward Willats a écrit :

> I am winding the toroids for my K2 SSB adapter.
>
> After I got 22 turns on this thing, I noticed the insulation on 2-3 
> adjacent windings had (rubbed?) off, one on the top, two on the side 
> of the core.
>
> Not sure how I did this.
>
> Not sure if the bottom of these wires is making contact with the core.
>
> Does it matter? Am I messing up the lines of force in my inductive 
> magnetic field or do I just rewind "to be safe."
>
> (Tried to search the archives, but man, the usual toroid tining topic 
> has created so much noise...)
>
> Thanks,
>
> -- Ward
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.): 
> http://mailman.qth.net/mailman/listinfo/elecraft    Help: 
> http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
===============================================
Jean-François Ménard / VA2VYZ
jfmenard at mac.com

Club d'Astronomie Amateur de Sherbrooke
Club Radio Amateur de l'Estrie

Mon site web personnel : http://homepage.mac.com/jfmenard
===============================================