[Elecraft] Recommended sequence for adding options

[Don Wilhelm]

Bart,

While there is no real requirement other than to build the base K2 first, I
prefer to build in the following sequence:
K2, K160RX, K60XV (if added), KSB2, KNB2, KAF2 - then add the others in any
order.

My reason -- All the options above (except the KNB2) have some influence on
the alignment of the final K2 bandpass filters or the BFO/Filter alignment.
Once these options have been added, the K2 can be properly aligned knowing
that the other options will only require adjustments for the option itself
and will not alter the previous alignments.

73,
Don W3FPR

----- Original Message ----- >
> I started to build the K2. Can anyone recommend a sequence for adding the
> options:
> - k2 noise blanker
> - k2 SSB
> - k2 rs232-i/o option
> - k2 Audio filter and RTC
> - k2 antenna tuner
> - k2 160m & 2nd antenna option
> - k2 internal battery option?
>