[Elecraft] Recommended sequence for adding options

[David Pratt]

PE3BB de G4DMP

I would suggest....
1. KNB2 Noise blanker
2. K160RX 160m/2nd Ant
3. KSB2 SSB

Do those first, as they do not attached to the top cover.

then..
4. KAT2 ATU
5. KBT2 battery option

Once these are all working correctly, then add..
6. KIO2 I/O Option

and finally, the
7. KAF2 AF filter/RTC

Be mindful of the various links and component changes that need to be 
done when adding the options. (Tack them in with the minimum of solder 
and without bending the wires over)

I hope that helps.

73 de David G4DMP

In a recent message, PE3BB <pe3bb at amsat.org> said....
>I started to build the K2. Can anyone recommend a sequence for adding the
>options:
>- k2 noise blanker
>- k2 SSB
>- k2 rs232-i/o option
>- k2 Audio filter and RTC
>- k2 antenna tuner
>- k2 160m & 2nd antenna option
>- k2 internal battery option?
>
>I appreciate all input.