[Elecraft] How to get your own board trace images

[G3VVT@aol.com]

Followed on with that idea by scanning the K2 RF board from my newly arrived 
K2 kit on my PC scanner. In color with 400dpi and the image cropped to size, 
the .bmp file size is about 29Mb for this board. Saved as an uncompressed .jpg 
file at about 7.5Mb for each side of the board.

The resolution at this level of definition appears very adequate for most 
purposes and would probably come out well with a photo printer if a hard copy was 
needed. Will add the other boards onto the PC HD before construction. Could 
be burnt onto a CD if the PC HD space was needed for other uses.

Regards,
Bob. G3VVT


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---