[Elecraft] Re: K2 PLL Reference Oscillator

[Tom Hammond]

Hi Guys:

It's given cursory mention in the Troubleshooting section of the Rev E 
manual, but it still doesn't address having the FCTR probe not (or mis-) 
installed. From the Rev E Manual:

232 CAL PLL on      INFO 232 is most likely to be displayed
     wrong band      if you use CAL PLL without first
                     selecting 40 meters.

At 07:42 AM 9/28/03, Don Wilhelm wrote:
>Ken,
>Info 232 say one of 2 things:
>1) you are not on 40 meters - not so in your case
>2) The internal counter probe is not connected correctly
>   - or that the probe is not working.
>
>I'm not sure why it is not in the manual now.  My Rev C manual shows Info 
>231 for VFO counter cable not plugged, (and Info 230 for BFO probe not 
>connected)- Wayne, what gives?  It is properly documented in the Version 
>2.0 Firmware upgrade data sheet.
>
>73,
>Don W3FPR