[Elecraft] KRC2 confusion

[WK6F]

For the first time ever I'm confused by an Elecraft manual........

The corrected silk screen diagram for the top of the board corrects the R12
and R13 labeling.  However, it has R12 on the left.  I traced the board, and
the component pads for "R12" as labeled connect to C17 and C12 (+12v).
According to the schematic, this should be R13, 47 ohms.  The component on
the right connects between U2-4 and U2-8, which should be R12

Also, the assembly manual calls out R12 to be 4.7K, but the schematic shows
100K.  The kit provides 4.7K.

Anybody else built one of these?

Thanks,

Ken WK6F