[Elecraft] AtoB mods on K2#1043

[Timothy A. Raymer]

At 17:11 09/10/2003 +0200, rein couperus PA0R wrote:

>I think I  have broken something in the process, as I can't get enough output
>on the higher bands.


Look at the Transformer, T2 I think is its designation.  It is happiest 
when it is about 1/8in. or 3.2mm off the board.  I accomplished this with 
some double sided sticky tape.  The effect of this spacing is most 
noticable on the high bands.

I also looked through the elecraft Web site.  They have a link to

http://www.qsl.net/ve3mcf/elecraft_reflect/K2_Power_Output_Expectations.txt

which also mentions checking the interleaving of the transformer T4.


Tim Raymer
73 de KA0OUV
K2 #1383
Timothy A. Raymer               <traymer@mail.state.mo.us>
Missouri Department of Health   <raymet@dhss.state.mo.us>
and Senior Services