[Elecraft] BFO Mod Trouble

[Patrick Dal Porto]

I have just installed the BFO Mod kit and have gotten to the BFO =
realignment part of the instructions. I have switched to the 40 Mtr. =
band and connected the freq. counter to TP2.  When I select CAL FCTR =
from the menu, I should get 4910 to 4918 kHz.  However, I do not.  I get =
4920.20 fluctuating to 4920.53.  The instructions indicate that with a =
flucuating frequency, I may have a bad solder connection.  I have =
resoldered the connections twice with no change.  Also when I check the =
frequency range I get 4920.20 to 4920.53 for the High Freq. and 3888.78 =
to 3888.12 for the Low Freq. with both fluctuating.  I did install the =
12 microHenry L31 that is from the Temp.-Compensated PLL upgrade parts.  =
Could this make a difference?  Any hints or guidance from anyone or =
should I try resoldering the parts again.  Having no trouble putting the =
K2 together and now having trouble with this simple mod, has me =
scratching my head and wondering what direction to head now. =20

Thanks
Pat W8FV 

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---