[Elecraft] I transmit 50Hz lower than I receive

Tue Oct 28 21:04:00 2003

Hi, All,

If I recall correctly, the radio always transmits with OPT1.  If Merlin is
using a CW filter that has the BFO adjusted 50 Hz off from the settings of
OPT1, would that cause his problem?.  I'm assuming of course he has the SSB
option installed.

Maybe I'm wrong about that, but it sticks in my head from somewhere.

Good luck,

Bill
NA7Y

----- Original Message ----- 
From: "Ron D'Eau Claire" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Tuesday, October 28, 2003 3:48 PM
Subject: RE: [Elecraft] I transmit 50Hz lower than I receive

> 50 Hz?
>
> I've never heard of that with the K2.
>
> I hate to suggest the obvious, but do you have RIT enabled?
>
> Ron AC7AC
>
> -----Original Message-----
> Has anybody had this happen?  My K2100, no. 2613, which has the KSB2
> installed transmits 50Hz lower than it receives.  I did the PLL\BFO
> stability mod, but
> I think this rig has done this since the very beginning...
>
> Help!
>
> Merlin Petroff, W3ICT
>
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be subscribed to post to the list.
> To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> Also see: http://www.elecraft.com/elecraft_list_guidelines.htm