[Elecraft] K1 #1720 lives

Sat Nov 29 14:00:00 2003

Hey Jim,

I just measured the pot with an ohm meter to make sure that they were the
same value. I think that this was mentioned as an appropriate way in the K2
manual, so I used the same method on the K1. The readings do concur pretty
much with my Yaesu meter, so I figured that the method works just fine.

Hope all is well in your neck of the woods.

73's Trev - KG6CYN
http://www.qsl.net/kg6cyn
----- Original Message ----- 
From: "James R Giammanco" <[email protected]>
To: <[email protected]>; <[email protected]>; <[email protected]>;
<[email protected]>
Sent: Friday, November 28, 2003 5:12 PM
Subject: [Elecraft] K1 #1720 lives

> Just finished K1 #1720, which Wayne, K5EOA, and I built for Wes, W5DPM.
> Four band K1, plus ATU and noise blanker. Everything was nominal and all
> items function as designed. First QSO was W5DPM with Chris, KD5UDB, also
> a K1.
>
> One question lingers. Has any further method of calibrating the reflected
> power on the KAT1 been suggested beyond the "set visually to the same %
> rotation as the forward power potentiometer" method?
>
> 72
> Jim N5IB
> K2 #1233
>
>
> ________________________________________________________________
> The best thing to hit the internet in years - Juno SpeedBand!
> Surf the web up to FIVE TIMES FASTER!
> Only $14.95/ month - visit www.juno.com to sign up today!
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be subscribed to post to the list.
> To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> Also see: http://www.elecraft.com/elecraft_list_guidelines.htm
>