[Elecraft] K2 voltage drop across D10 and F1=== Thanks

[Ed Milcarsky]

Thanks for all the responses.
As it turns out I did have a bad connection at the power supply, as many of
you suggested.  After correcting the problem I get about 0.5 volts drop on
the K2 display which agrees with the measured data below.

I lifted the cover on the K2 and placed a voltmeter across D10 and F1 with
the following results:

K2 current display on LCD = 2.8 Amps
voltage across D10 = 0.24 V
voltage across F1   = 0.17 V
total drop               = 0.41 V

measured with an uncalibrated Radio Shack DVM

73 de Ed  KG4ARN