[Elecraft] Low 10m output with KPA100/KAT100 combi

[Baker]

Hi All,

Symptom:- Only 50W output on 10M from KPA100/KAT100 mounted in=
 EC2 
enclosure. Power output OK on all the other bands .

Remedy:- Connect KPA100 input to the KAT2 antenna 1 connector  
instead of the K2 antenna connector ! Now gives 80W+ on 10M.

Hope this saves someone from spending the time that I did chasing=
 
down this 'fault'.

73

Stewart G3RXQ
-- The Bakers' Home
-- baker@nildram.co.uk on 15/11/2003