[Elecraft] TT 701 mic on K2
Don Brown
[email protected]
Sat May 24 22:57:00 2003
Hi
Yes the TT 701 will work fine with the K2. I used the same value Elecraft
uses with their MH2 5.1K. The TT 701 has a 4 pin connector. Change it out to
an eight pin and wire it like a MH2 unless you have some other mike you are
going to use also. In that case wire the TT701 to match the other mike.
Don Brown
KD5NDB
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Saturday, May 24, 2003 9:31 PM
Subject: [Elecraft] TT 701 mic on K2
> Folks,
>
> Wanting to put a TenTec 701 mic on a K2, anyone have an idea whether or
> not a TT 701 hand mic needs a resistor between the +5V supply and the mic
> AF audio out as does an Icom HM-12 ?
>
> I guess best first guess is to use 10k in line resistor and then see how
> well it works.
>
> Cheers & 73s de Mark W4CHL
> Chapel Hill NC USA http://rtpnet.org/parc
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed. To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html ---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>