[Elecraft] ELECRAFT NET: 17m Test "Results"

Richard Lim [email protected]
Sun May 18 17:10:00 2003


Stephen there is definitely an interest! A group of us were on 18.130, I
heard W7QHD, K5JAZ, W1USN on phone and KK7SS on CW.  The guys I heard on
phone were all using the K2/100, not sure about KK7SS. I agree that we need
a station with good antennas and perhaps an amp to boot to act as net
control.  Overall a good first start, lets keep this one going.  Oh one last
thing, I think we'll need to DEFINITELY have check-ins also in CW, there is
little chance now that we are in the decline of this solar cycle that phone
will be reliable for those of us running 10W from the K2, also we would be
neglecting our K1 brothers (and sisters too).  Just my two cents.
Rich
-- 
73 DE KQ9L K2/100 #3232


On 5/18/03 3:53 PM, "Stephen King" <[email protected]> wrote:

> Well, folks .....
> 
> Thanks to ALL who listened and then also posted already to the reflector....
> It is GREATLY appreciated!
> 
> Well, it seems conditions were TOO good!  18132 was busy from before 2000z
> until almost 2030z.  I made some calls on other close-by frequencies but had
> no luck in stirring up any business.   I tried 18128 and 18135 .... no luck!
> 
> I also scanned the band .. it was pretty crowded all the way from top to
> bottom.  Conditions were good AND strange.  The loudest sigs on the band
> here today were DX from Europe and a mobile station near Dayton -- something
> for everybody.
> 
> BOTTOM LINE:  Even though the "test net" was effectively "scrubbed" there
> are some lessons learned ...
> 
> 1) It sounds like a fair number of you attempted to listen: THERE IS
> INTEREST!
> 2) We need at least a plan for an alternate frequency.
> 3) For the next try we need a QRO station with a decent antenna to try to
> get things going: my 10w and dipole did not get the job done.
> 
> Comments please???
> 
> 
> Peace & 73
> Stephen
> W3SMK
> K2 #2644
> 
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com