[Elecraft] K2 PLL after BFO Mod Trouble

[Dave]

Geoff

I had this problem when I did the "thermistor mod", if that's the mod you
have done, check to see if you really needed to add the resistors on the
underside of the board (2 x 10K if my memory serves me correctly). These
resistors are only needed on the very early K2s.

73s Dave, G4AON
K2 #1892

----- Original Message ----- 
From: <K6TFZ@aol.com>
To: <elecraft@mailman.qth.net>
Sent: Saturday, May 17, 2003 6:28 PM
Subject: [Elecraft] K2 PLL after BFO Mod Trouble


> Just did the BFO mod.
> Low freq was a touch high so added a little cap. Now it's right on.
> Now it won't do a PLL. Get Info 232.
> Counter is plugged into TP1. K2 is set for 40 meters.
> Where do I start?
> TIA.  Geoff, K6TFZ
>