[Elecraft] Building the K2

Fri May 16 14:24:01 2003

And toward the rear of the manual there IS a basing diagram
for all the transistors and ICs.

Doug,
W6JD

----- Original Message ----- 
From: "Bruce D. McLaughlin" <[email protected]>
To: "'Tom, W6WW'" <[email protected]>; "'- Elecraft'" <[email protected]>
Sent: Thursday, May 15, 2003 2:11 PM
Subject: RE: [Elecraft] Building the K2

> 
> 
> " (One thing I can't recall is how to tell which pin of a transistor is
> the collector - the base is the middle, but which way do you look at it
> to find the collector?)"
> 
> I didn't worry about that.  The main thing is that the transistors
> should be installed with the same orientation as their outlines on the
> silk screening on the boards.  You shouldn't go wrong if you do that.
> 
> Bruce - W8FU
> 
> 
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 