[Elecraft] How do I config the K2 to put out RF on the original BNC connector?

[ke6d@juno.com]

Hi,

I recently acquired a "pre-owned" K2 for portable
use. This K2 seems to to put out > 10W and can
hear decently. But in comparing with my K2/100
(# 168), it appears that it could use a little
bit of "alignments" to bring it to par with my
own K2.

When I opened up this K2 and inspected it carefully,
I found out that all the toroids and transformers
have one extra turn to them. How does the radio
even work is beyond my belief... :=(

I took apart T5 and rewound it according to the
instruction. Now all the VCO voltages fell within
the acceptable ranges. But now I have to take all
other toroids and transformers out and rewind every
single one of them!

This K2 has quite a few options to it including
the ATU unit. My question to the group is how
do I configure this K2 back to its basic form
(so that RF can come out of the original BNC
connector) for transmitter alignment?

Tnx es 73,

Dan, KE6D



============================
Danh Le, KE6D
Milpitas, CA 95035
Home Page: www.qsl.net/ke6d

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!