[Elecraft] Re: Re:Info 232

[Steve Jackson]

Rod

OK, thanks, I did the same thing!  Found it, fixed it.

CAL PLL now works, and output is restored on 'some' bands.

While 'fixing' the problem, I plugged in 12VDC to the AUX RF plug by
accident and don't know what kind of damage I caused.  The rig was on 40M
and I know relay K12 is history, since 40 is dead.  I just don't know how
many other things fried.  Output is way off on most bands now.

73 Steve KZ1X/4
K2 #771

* * *
----- Original Message -----
From: <WA9GQT@aol.com>
To: <ssj@nc.rr.com>; <elecraft@mailman.qth.net>
Sent: Sunday, May 04, 2003 7:09 AM
Subject: Re:Info 232


> Hi Steve!
>    Since the board is so small, it is easy to get solder bridges. See my
post from May 2. By the way that did solve
> my problem
>    Hi All!
>    Found the problem. When I reinstalled RP3 CAL PLL
> worked OK. Everything was fine. Rechecked the Mod board
> and found a solder bridge between RC and RF resistors.
> I have corrected the board but not installed it yet.
> That seems to be why I could not do CAL PLL.
>
> 73,
>
> Rod WA9GQT  K2 #1900  KPA100
>