[Elecraft] K2 PLL temp upgrade - problem

[Dave]

Yes, I know Dave... the issue is one of adding the 10 K resistors to RP2
where it's not needed.

Dave G4AON
K2 #1892

----- Original Message ----- 
From: "David A. Belsley" <belsley@bc.edu>
To: "Dave" <dave@astromag.co.uk>; <Elecraft@mailman.qth.net>
Sent: Saturday, May 03, 2003 10:54 PM
Subject: Re: [Elecraft] K2 PLL temp upgrade - problem


> Dave:
>   I hope your messages have had typos, because it is RP3, I believe, that
> is involved in the PLL temp upgrade, not RP2.
>
> best,
>
> dave belsley, w1euy
>
> --On Saturday, May 3, 2003 6:11 PM +0100 Dave <dave@astromag.co.uk> wrote:
>
> > Further to my last... If I read the upgrade instructions more carefully
> > and checked in my K2 original manual, then I would have realised RP2 in
> > my K2 is 82K and not 100K of the earlier models. I've removed the 10 K
> > resistors from pins 1/2 and 3/4 and now my K2 performs as per the
> > instruction sheet.