[Elecraft] KAT2 SWR readings ?

[Dave @ Interaccess.com]

I just finished building my KAT2 and was running the calibrations. It
seems to calibrate OK and agrees with the meter. So far so good. Then I
set up the SWR. And on 40 meters it was 1:1. Then I went to the higher
freq. Bands and it started rising on 20 meters it was 1.1:1 but by the
time I got to 15 Meters it was indicating 1.6:1 and on 10 mdters it
indicates 2.2:1. Anybody got a guess where I should start looking? I'm
almost sure the SWR indication should not be 2.2:1 on 10 Meters???? Is
it Normal???

I checked the archives and didn't see a post about this "problem".

Thanks in advance

De Dave WB9SOG