[Elecraft] AGC threshold Voltage 3.7v - part II

[Don Rasmussen]

Hi Guys,

Okay, I read in the archives where my issue can be
caused by low voltage from the regulator transistor
and sure enough I have 7.8 volts rather than 8 volts.
It's okay with respect to the R1 adjustment because
that will probably end up at 3.5 volts anyway (from
previous posts). I'll ask Gary at Support@elecraft.com
on Monday if there are any other ramifications of
running that regulator at 7.8 volts - any input from
the list about that would also be welcomed!

Thanks,
Don Rasmussen WB8YQJ/6
Carlsbad, Ca. 


> 
> Phase I tests went perfectly with the exception of
> the AGC threshold voltage setup (manual page 46) 
where 3.7 volts...

__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com